Copertina di Balancing Exhaust Ventilation Systems
Titolo del libro:
Balancing Exhaust Ventilation Systems
Effectiveness of the “Common” Method in Balancing
Exhaust Ventilation Systems
VDM Verlag Dr. Müller
(10.02.2009
)
eleggibile a buono
ISBN-13:
978-3-639-12030-1
ISBN-10:
3639120302
EAN:
9783639120301
Lingua del libro:
Inglese
Risvolto di copertina:
Dampers are used to adjust the distribution of
airflows in duct systems. The “common”(i.e., most
commonly used) method is to adjust each damper in
turn so that the airflow through its branch equals
the desired level. Typically, the airflow through
each branch duct is estimated from the centerline
velocity pressure. To test the effectiveness of that
approach, dampers were adjusted on a seven branch,
full-sized experimental duct system. After adjusting
the dampers for a given condition, the percent
excess airflow (%Qexcess) for the system was
estimated as the amount above the ideal fan airflow
that would exist if the fan speed were adjusted so
that the lowest ratio of airflow to airflow goal for
any branch was unity. The lower the value of percent
excess airflow, the more perfectly balanced the
system was. The results varied with the level of the
target airflows. The excess airflow values were much
higher than the airflow values found by Dodrill
(2004) on the same system for the “SPh Goal Ratio”
method proposed by Guffey (2005). This analysis
should be useful to professionals in the fields of
HVAC and ventilation design.